Laser engraved
photo stamp

Transform your photos into impressing stamp imprints

photo engraved on stamp

準備

Required material
  • laser rubber
  • stamp, we used Trodat Professional 5215
Trotec laser used
  • Speedy 100
  • 60 watts
Tip
  • Use a 1.5 inch or a 2.0 inch lens.
paper-photo-stamp-jobcontrol.zip

ZIP

今すぐダウンロード
csm_paper_photo_stamp_562a7e16ae.png

PDF

今すぐダウンロード

ステップ・バイ・ステップ

Step 1

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.

Find here a detailed guide how to prepare a photo for stamp engraving.

Step 2

Step 2: Engrave and cut the laser rubber

Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Used engraving parameters (black):

Power 100 %, Speed 18 %, 600 ppi

Used cutting parameters (red):

Power 100 %, Speed 2,5 %, frequency 2000 Hz

Step 3

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can assemble the two parts.

Speedyシリーズ
名入れに最適なレーザー加工機です。

レーザー加工機のご紹介

用途や設定に関するご質問がおありですか?
エアアシストの A から z-offset の Z まで喜んでアドバイス致します。

詳細情報を希望する

会員 troGROUP Logo