Laser engraved
photo stamp

Transform your photos into impressing stamp imprints

photo engraved on stamp

Preparazione

Required material
  • laser rubber
  • stamp, we used Trodat Professional 5215
Trotec laser used
  • Speedy 100
  • 60 watts
Tip
  • Use a 1.5 inch or a 2.0 inch lens.
paper-photo-stamp-jobcontrol.zip

ZIP

Scarica ora
christmas card laser engraved
csm_paper_photo_stamp_562a7e16ae.png

PDF

Scarica ora

Passo dopo passo

Step 1

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.

Find here a detailed guide how to prepare a photo for stamp engraving.

Step 2

Step 2: Engrave and cut the laser rubber

Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Used engraving parameters (black):

Power 100 %, Speed 18 %, 600 ppi

Used cutting parameters (red):

Power 100 %, Speed 2,5 %, frequency 2000 Hz

Step 3

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can assemble the two parts.

Serie Speedy
L’incisore laser e la laser cutter ideali per la personalizzazione.

Scoprite incisori laser e laser cutter

Avete domande sulle applicazioni o sulle impostazioni?
Siamo lieti di consigliarvi dalla A di Air Assist alla Z di offset Z.

Richiedi maggiori informazioni.

Membro orgoglioso di troGROUP Logo