photo engraved on stamp

Laser engraved
photo stamp

Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.

Is it a stamp or photo? Have a close look and discover the filigree details of the stamp which will imprint on any kind of paper. In this tutorial you can create a stamp imprint by laser engraving stamp rubber. Laser rubber is available from our engraving supplies webshop.


Materials required
  • Laser rubber
  • A stamp, we have used a Trodat Professional 5215
Trotec laser machine used
  • Use a 1.5 inch or a 2.0 inch lens for laser engraving.


Download now


Download now

Step by step

stamp engraving
Step 1

Step 1: Choose your photo

Where possible, use a high-contrast portrait photo with a light, even background. When using pictures from Internet, always download large-scale images.

Read our detailed guide on how to prepare a photo for stamp engraving.

Step 2

Step 2: Laser engraving and cutting the laser rubber

Open the file "Photo stamp" and send it to the laser using the recommended laser parameters for the material. Parameters vary depending on your laser machine and its available laser power.

Used laser engraving parameters (black):

Power 100 %, Speed 18 %, 600 ppi

Used laser cutting parameters (red):

Power 100 %, Speed 2.5 %, frequency 2000 Hz

Step 3

Step 3: Assembly

Once you have finished laser cutting and engraving the rubber, you are ready to fix it into the stamp.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo