Laser Engraved
Photo Stamps

Creating impressive stamps from photos is easy with your laser engraver, capturing even the finest details of the image.

photo engraved on stamp


Required material
  • laser rubber
  • stamp, we used Trodat Professional 5215
Trotec laser used
  • Speedy 100
  • 60 watts
  • Use a 1.5 inch or a 2.0 inch lens.
Paper Photo Stamp


Download now
christmas card laser engraved


Download now

Step by step

stamp engraving
Step 1

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images. Get a detailed guide how to prepare a photo for stamp engraving here.

Step 2

Step 2: Engrave and cut the laser rubber

Open the file "Photo stamp" (Download our sample file) and send it to the laser with the recommended laser settings. The settings will vary depending on the machine used and the available laser power.

Recommended engraving settings (black):

Power 100 %, Speed 18 %, 600 ppi

Recommended cutting settings (red):

Power 100 %, Speed 2,5 %, frequency 2000 Hz  

Step 3

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can assemble the two parts per the stamp instructions.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo