Laser engraved
photo stamp

Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.

photo engraved on stamp


Required material
  • Laser rubber
  • Stamp, we used Trodat Professional 5215
Trotec laser used
  • Speedy 100
  • 60 watts
  • Use a 1.5 inch or a 2.0 inch lens.


Download now


Download now

Step by step

stamp engraving
Step 1

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from the Internet, always download high quality, large-scale images.

Find here a detailed guide on how to prepare a photo for stamp engraving.

Step 2

Step 2: Engrave and cut the laser rubber

Open the "Photo stamp" file and send it to the laser with the recommended laser parameters. The parameters may vary depending on the machine used and the available laser power.

Engraving parameters (black):

Power: 100%, Speed: 18%, Frequency: 600ppi

Cutting parameters (red):

Power: 100%, Speed: 2.5%, Frequency: 2000Hz

Step 3

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can put the two parts together.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo