--------------------------
photo engraved on stamp

Laser engraved
photo stamp

Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.

Preparation

Required material
  • laser rubber
  • stamp, we used Trodat Professional 5215
Trotec laser used
  • Speedy 100
  • 60 watts
Tip
  • Use a 1.5 inch or a 2.0 inch lens.
paper-photo-stamp-jobcontrol.zip

ZIP

Download now
Paper-photo-stamp

PDF

Download now

Step by step

engraving photo on stamp
Step 1

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.

Find here a detailed guide how to prepare a photo for stamp engraving.

Step 2

Step 2: Engrave and cut the laser rubber

Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Used engraving parameters (black):

Power 100 %, Speed 18 %, 600 ppi

Used cutting parameters (red):

Power 100 %, Speed 2,5 %, frequency 2000 Hz

Step 3

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can assemble the two parts.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo