Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.
- laser rubber
- stamp, we used Trodat Professional 5215
Trotec laser used
- Speedy 100
- 60 watts
- Use a 1.5 inch or a 2.0 inch lens.
Step by step
Step 1: Choose your photo
If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.
Find here a detailed guide how to prepare a photo for stamp engraving.
Step 2: Engrave and cut the laser rubber
Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine being used and the available laser power.
Recommended engraving parameters (black):
Power 100 %, Speed 18 %, 600 ppi
Recommended cutting parameters (red):
Power 100 %, Speed 2,5 %, frequency 2000 Hz
Step 3: Assembling of stamp and text plate
As soon as the rubber sheet is engraved and cut, you can assemble the two parts.