JobControl® Cut is a fully integrated editor to process and optimise basic cut geometries in our JobControl® laser software – without the need to change the original geometries in the graphics software again. JobControl® Cut is already included in the JobControl® 11.0 update.
- JobControl® Cut is easy to use and requires minimal training
- An optimal work flow not only saves costs, it enhances the finished quality of end products
- Use JobControl® Cut for a perfect laser cutting result
Contours can be assigned to process colours to define them as inside or outside laser cutting lines or to select them as vector engraving.
With the automatic connection of laser cutting geometries, adjacent lines are combined to form a continuous laser cutting contour. Thus, the cutting geometries can be repaired quickly and easily. Avoidable piercing positions are eliminated with the push of a button.
With the function "set start point", the ideal start points can be selected. This means that irregularities in the laser cutting lines are avoided.
With kerf correction, the fitting accurancy of components and dimensional errors caused by the kerf of the laser are compensated. Plug-in connections are aligned, meaning they fit perfectly together.
With defining the lead in / lead out segments, the laser starts outside the actual laser cutting geometries. The piercing process has no negative impact on the quality of the finished product edges. The edge quality gets consistent along its entire path throughout the workpiece.
The sorting function allows you to optimise the laser cutting sequence, which reduces the processing time for the job. A simulation lets you check the laser cutting sequence before you execute it at the laser machine.
Your original data will not be overwritten as JobControl® stores the edited version as a seperate version in the job queue.