Galvo rotary engraving attachments

Using a rotary attachment with a SpeedMarker marking laser

What is the rotary engraving attachment used for?

Trotec's SpeedMarker marking lasers allow you to laser mark cylindrical and round objects with the addition of a rotary engraving attachment. The rotary engraving attachment allows you to laser mark rotating objects so that the laser always works in focus. The segmentation is carried out using the SpeedMark marking software. With the rotary engraving attachment you can laser mark components 360°, both on the circumference and on the inside of the material.

Discover SpeedMark laser marking software


Engraving the inside of a ring: Tutorial

You use the rotary engraving attachment, you must first connect it to the laser. In the tutorial below you will learn how to connect the rotary engraving attachment to the marking laser and to the software. Once the rotary engraving attachment is connected, it can be controlled via the SpeedMark laser software. In the software, you define the desired marking content and set the laser parameters as well as the desired segmentation. In order to engrave inside the ring, you must position it at an angle under the laser. This ensures that the laser beam does not hit the outer section of the ring (see picture). It's as easy as that to refine the ring through laser engraving.

Tutorial: Rotary indexer