Christmas Village

Step by step guide

paper house model laser cutting

Preparação

Required material

Paper 160gr in
- white
- green
- black

Glue

Trotec laser used
  • Speedy 360
  • 80 watts
  • 1.5 inch lens

Tutorial

paper model house laser cut
Passo 1

Step 1: Your graphics

Import the “Christmas Village” file consisting of 6 tabs into your regular graphics software. Each tab will form your village: Houses, roofs, trees. We have used white for houses, black for roofs and green for trees. However, you can change these hues depending on the colors of your table, of course.

Lasercut House for Christmas
Passo 2

Step 2: Parameters

We have used a Speedy 360 (80 W) for cutting 160-g paper. Place the paper into the machine, then use the following laser parameters:

Laser Settings

Kiss-cut: Power: 9% - Speed: 2% - Frequenzy: 1000 Hz -
Air Assist: ON - Z-Offset : 1.5
Cutting 1: Power: 9% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON
Cutting 2: Power: 20% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON

paper house
Passo 3

Step 3: Assembling the pieces

Once the paper is cut, remove the various parts from the working table and assemble them. For building a house, fold and glue the walls, then add the roof. To create the trees, simply insert the two parts.

paper house laser cut
Passo 4

Step 4: Tips & Tricks

  • For optimal and precise focusing, we have used the ultrasonic technology of the Speedy 360.
  • Use a black background to make the village shine
  • To illuminate the interior of houses, place a small LED candle inside
  • To make this setting magical, spray some artificial snow onto the rooftops once the village is set up… Effect guaranteed!

Linha Speedy
A máquina de gravação e corte a laser ideal para personalização.

Conheça as máquinas de gravação e corte a laser

Perguntas sobre aplicações ou configurações?
Teremos o maior prazer em auxiliá-lo em todos os assuntos pertinentes, de A, de Ar Auxiliar, a Z, de Z-Offset.

Fale conosco
Orgulhoso membro do troGROUP Logo