Christmas Village

Step by step guide

Hazırlık

Required material

Paper 160gr in
- white
- green
- black

Glue

Trotec laser used

Speedy 360
80 watts
1.5 inch lens

paper-village-JC.zip

ZIP

Şimdi indirin

ZIP

Şimdi indirin

paper-village.zip

ZIP

Şimdi indirin

ZIP

Şimdi indirin

Adım Adım

Adım 1

Step 1: Your graphics

Import the “Christmas Village” file consisting of 6 tabs into your regular graphics software. Each tab will form your village: Houses, roofs, trees. We have used white for houses, black for roofs and green for trees. However, you can change these hues depending on the colors of your table, of course.

Adım 2

Step 2: Parameters

We have used a Speedy 360 (80 W) for cutting 160-g paper. Place the paper into the machine, then use the following laser parameters:

Laser Settings

Kiss-cut: Power: 9% - Speed: 2% - Frequenzy: 1000 Hz -
Air Assist: ON - Z-Offset : 1.5
Cutting 1: Power: 9% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON
Cutting 2: Power: 20% - Speed: 2% - Frequency: 1000 Hz -
Air Assist: ON

Adım 3

Step 3: Assembling the pieces

Once the paper is cut, remove the various parts from the working table and assemble them. For building a house, fold and glue the walls, then add the roof. To create the trees, simply insert the two parts.

Adım 4

Step 4: Tips & Tricks

For optimal and precise focusing, we have used the ultrasonic technology of the Speedy 360.
Use a black background to make the village shine
To illuminate the interior of houses, place a small LED candle inside
To make this setting magical, spray some artificial snow onto the rooftops once the village is set up… Effect guaranteed!

Speedy serisi
Kişiselleştirme için ideal lazer kazıma ve kesim makinesi.

Lazer kazıma ve kesim makinelerini keşfedin

Uygulamalar veya ayarlar hakkında sorularınız mı var?
Air assist için A’dan, z ofset için Z’ye kadar size tavsiyede bulunmaktan mutluluk duyarız.

İletişim