--------------------------
ironing film laser cutting

Heat transfer film
cut with a laser

Decorate your textiles with your favourite designs, logos and lettering "screen-printing like".

Create exciting designs and logos with LaserFLex! laser cutting the film allows you to create unique designs to personalise your favourite textiles and fabrics with. LaserFLex is available from our engraving supplies webshop.

Preparation

Required material
Trotec laser machine used
Textile Heat Transfer Film

ZIP

Download now
Textile Heat Transfer Film

PDF

Download now

Step by step

ironing film laser cutting
Step 1

Step 1: Laser cutting and engraving LaserFlex

The first stage is to create your own design or import our template. Send the graphic to the laser with the recommended laser parameters, which will vary depending on the machine used and it's available laser power.

Recommended parameters:

Engraving: Power: 50 %, Speed: 50 %, Resolution: 500 dpi, air assist on
Cutting: Power: 12 %, Speed 1 %, Frequency 1000 Hz, air assist on

Step 2

Step 2: Transfering your design to textiles

Transfer LaserFlex onto textiles using a heat press. Transfer the film for 17 seconds at 165°C / 329°F. Wait until the material is completely cold to remove the liner. 

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo