Bottles with lace decoration

Preparation

Materials required

Laserable bottle, any colour (available from Trotec)

Machine used:

Speedy 400
100 watts CO2
2" lens
Rotary attachment

Any Speedy series laser engraver can be used to create this sample. For help installing the rotary attachment, please refer to the operating manual of your Speedy laser.

Bottles_decorated_with_lace.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Design

Start by importing our template and adapting it to your requirements. With "Create job" move the design to the "Prepare" screen.

If you use laserable bottles from Trotec, you can directly import the job. The name is saved as a separate design, so you can easily remove it or replace it with another one.

Step 2

Laser process

Place the job in the desired position and adapt the settings. If you have imported the Ruby® job, this step is negated as you have already imported all the necessary settings.

The laser parameters may vary depending on your laser machine and available laser power.

Send the job to the "Queue" for laser processing.

Effect	Engrave Quality
Process	Engrave
Layers	black
Power (%)	100
Speed (%)	60
DPI	500
Source	CO2
Air Assist	On
Z-offset	-
Passes	1
Power Correction	20
Direction	Bottom up
Dithering	Ordered
Engraving Mode	Standard
High Quality

Inspiration

The same graphic can be used for a variety of designs. For fast processing, bottles can be processed without the rotary attachment, although this has limitations, as you cannot engrave 360 degrees. You can download the templates for this.