Leather Pencil Roll

Step by step instruction

Looking for a stylish way to store your stationery? Our new tutorial shows you how to create a pencil case made from our new LaserLeather material, perfect as a stylish product or gift. 

Shop LaserLeather


Preparation

Materials required:

  • LaserLeather black/blue, 425 x 200mm 
  • 4 pens to add to the completed case

Laser engraving machine used:

  • Speedy 360, 80 watts
  • 2" lens
  • Nozzle with small hole diameter
  • Vacuum table with honeycomb table support

LaserLeather can also be processed with another Speedy laser engraving machine, simply adjust the parameter settings according to your laser.

Downloads:

Graphic files


Step by Step

Step 1: Import/create print & laser template

Either create your own design or use our ready made template. The job can now be sent to the laser machine using the below settings.

Print settings:

Process mode: Standard
Resolution: 500dpi
Cut line: none
Halftone: Colour
Others: Optimised geometries,
inner geometries first,
minimise to job size

 

 


Step 2: Laser cutting and laser engraving

Create the laser parameters. Please note that our suggested parameters will vary depending on your laser machine and the laser power available.

To process the LaserLeather, use the vacuum table with honeycomb table top and the nozzle with the small hole diameter. Put the LaserLeather into the laser machine and cover the rest of the working surface around the material to create a vacuum and achieve good exhaust performance.

Then start the laser engraving and laser cutting process.

Laser parameters: 

  Engrave Cut
Colour Black Red
Process Engrave CO2 Cut CO2
Power (%) 60 20
Speed (%) 100 2
ppi/Hz Auto 1000
Passes 1 1
Air Assist ON ON
Z-Offset +1 -
Direction Bottom to top -
Advanced Optimised Quality -

Step 3: Assembling the case

Once laser cutting and engraving is completed, remove all cut parts from the laser machine. If necessary, clean the cut parts carefully with a slightly moistened cloth.

Insert the wide band from the bottom through the first slit so that the four small holes on the band are exactly over the four holes of the pin roll.

Now thread the narrow band through the four small holes so that the band crosses over on the upper side.

Turn the pencil case over and knot the thin tape on the back. Then shorten the ends with scissors.


Steps 4: Finish the pencil case

Now place the pins one after the other on the inside of the case and pull the wide band through the slots so that the pins are fixed in the case. Tighten the tape so that the pins get a good grip.

Pull the ribbon through the slit at the top edge of the pencil case.

Finally, wrap the tape once around the outside of the case. Fix the end by pulling it once under the tape.


Why use Trotec LaserLeather for your application?

LaserLeather is a two-tone artificial leather suitable for a variety of laser applications. Everything from bags, backpacks, labels, jewellery, or, as shown here, a stylish storage option is possible. LaserLeather is a diverse material and thanks to easy laser processing can be transformed into many applications.  Intricate laser engravings and laser cuts are possible, where the second colour layer can be shown and add another dimension.

Use other colours to create the pencil case and personalise by adding names or unique designs.

Develop your creativity and discover the different colour combinations:

LaserLeather


Trotec Product Recommendations

See our lasers in action! Request a demo now
Request a demo now