Customer Service
Phone: +44-191-580-1184
E-Mail: uk@troteclaser.com
Contact form 
Custom Jewellery Display
Request a demoCreate a unique jewellery display using different TroGlass acrylic sheets. TroGlass is available to purchase from our engraving supplies webshop.
Preparation
Materials required:
- 1/4 sheet TroGlass Clear 8 mm
- 1/4 sheet TroGlass Clear 5 mm
- 1/4 sheet TroGlass Satins Orange translucent with double-sided adhesive foil on both sides
All of these materials are available from our engraving supplies webshop.
Laser machine used:
- Speedy 400, 120 Watt with a 2.5" lens
- Acrylic lamella or vacuum table with acrylic grid or distance holders
Any Speedy family or SP series laser machine can be used to create this display. To achieve a high-quality result and efficiently cut 8mm acrylic you need a laser power of 80W or more.
Important information:
- Remove the protective foil from the top of both the 5mm and 8mm acrylic prior to laser cutting and engraving
- Cover the rest of the working area with a suitable material (such as paper) to improve extraction
Step by Step
Step 1: TroGlass Clear 8 mm
Start by importing your design or our template into your graphic program and send the job to the laser using the below parameters.
Print settings
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Colour | enhanced geometries |
Step 2: Laser cutting and engraving: TroGlass Clear 8 mm
Select the parameters for the job. These can vary depending on your laser machine and available laser power.
Tips:
For a better result laser cut the acrylic before laser engraving.
Laser Parameters
| Colour | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| black | engrave CO2 | 23 | 75 | 500 |
| red | cut CO2 | 95 | 15 | 20.000 |
| Passes | Air Assist | Z-Offset | Advanced (plate set up) |
|---|---|---|---|
| 1 | on | - | Engraving direction from bottom |
| 1 | on | -2.5 mm | - |
Step 3: TroGlass Clear 5 mm
Import our template or your own design into the graphic program and send the job to the laser using the following parameters:
Print settings
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Colour | enhanced geometries |
Step 4: Laser cutting: TroGlass Clear 5 mm
Select the parameters which vary depending on your laser machine and its available power.
Laser Parameters
| Colour | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| red | cut CO2 | 50 | 0.2 | 20.000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | -1.5 mm | - |
Information:
- In this example we used the quality parameters from JobControl®
- You can download JobControl® parameters from www.troteclaser.co.uk
Step 5: TroGlass Satins
In your graphic program load the template and send it to the laser using the below parameters:
Print settings
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500 dpi | none |
| Halftone | Others |
|---|---|
| Colour | enhanced geometries |
Step 6: Laser cutting TroGlass Satins
Select your parameters for laser cutting, which can vary depending on laser machine and laser power available.
Laser Parameters
| Colour | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| red | cut CO2 | 30 | 0.2 | 20 kHz |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | - | - |
Info:
- We used the standard JobControl® parameters optimised for quality
- Material parameters for JobControl® are available at www.troteclaser.co.uk
Step 7: Post-processing and assembly
When assembling your display begin by gluing the coloured TroGlass Satin components to the 5mm clear acrylic, ensuring that the pieces are positioned exactly above each other.
The next step is to position the engraved 8 mm acrylic. To protect your laser engraved design position the engraved side onto the coloured acrylic.
Inspiration
You can create several different designs for your jewellery stands using different materials to help them stand out. When using thin acrylic cut a base out for the stand to ensure stability.
