Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step-by-step instruction
This new tutorial allows you to create the perfect wall art for nature lovers using your laser engraving machine.
All Speedy laser engraving machines are suitable for producing this sample.
Begin by importing our template, adjusting to your requirements as required. The transparent material has been cut to the size of the picture frame in this example. The printed design on the back of the ADA using a UV-printer.
As an alternative to this you can print full sheets and then use the JobControl Vision laser software to cut them down.
Import our template and adjust this to your requirements. It is important to pay attention to the thickness of the lines, as if they are too thin they can break easily. Use the driver settings below to send your job to the laser engraving machine.
Print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500dpi | none |
Halftone | Others |
---|---|
Colour | Optimised Geometries, Inner Geometries First |
Depending on your laser machine and the laser power, these parameters will vary.
Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Cut CO2 | 38 | 0.8 | 1000 |
Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |
Put the printed sheet with the Passepartout into the picture frame and stick the silhouette of the flower to the front. Your decoration is now ready for display.
TroLase ADA Signage is a solid, single-layer acrylic-based material. The main applications the material is used for are Braille signage and the production of tactile signage, as well as model making and 3D signage. This tutorial also showcases how the material can be used for filigree artistic applications.
An alternative to printing in this tutorial is to use other materials to bring colour into the art. For example, TroLase engraving laminates or woods can be put inside the flower.
Copyright notice: This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license. We assume no liability for illegal actions.