Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
In just a few mouse clicks, you can import material processing parameters into JobControl®.
To begin, open JobControl® on your computer. Select the Settings tab on the toolbar at the top of the window. Choose the Material Template Setup option (Ctrl+M) from the drop-down menu. The materials database will open in a new window.
Click on the gear symbol located on the bottom left-hand corner of the Material database window. Select the Import from file option, and a new window will open.
Next, select the file containing the material processing parameters that you wish to import. If records with the same file name exist, you may create a copy or overwrite the existing file.
We recommend that you select the Import materials and create copy on equal materal names option in the Material import window. This will prevent the accidental overwriting of eexisting parameters. You can change the parameters at any time after the import.
Contact our technical service department with any questions about JobControl®.