Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser processing parameters can be exported from JobControl® in XML format. These parameters can be re-imported at a later time, or imported to another computer with JobControl®.
Open JobControl® and select the Settings tab on the toolbar at the top of the window. Choose the Material Template Setup option (Ctrl+M) option from the drop-down menu. The materials database will open in a new window.
Click on the gear symbol located on the bottom left-hand corner of the Material database window. Depending on your preference, select either the Export all or Export selected material option.
Finally, select the storage location for the exported XML file(s).
Now select the storage location, and you're done!
Contact our technical service department with any questions about JobControl®.