Porta bicchieri in acrilico

Use acrylic to make an individual glass holder.
To browse full engraving material range, please visit www.trotec-materials.com

Preparazione

Required material

1 sheet of 3 mm TroGlass Satins
(available at Trotec)
Material to cover the engraving table (e.g. paper)
Paper tape

Machine used

Speedy 360 flexx
80 Watt with 2" lens

For this sample you only can use any laser machine from the Speedy series.

Important

Use the acrylic cutting grid table or the acrylic slat cutting table
Remove the protection foil from the side of the acrylic that you want to engrave. Leaving on the bottom protects the acrylic sheet from scratches during handling.

PDF

Scarica ora

PDF

Scarica ora

Passo dopo passo

Porta bicchieri in plexiglass tagliato laser

Fase 1

Step 1: Import /create design template

Import our design template into your graphic program and adapt it according to your requirements.

Print settings

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Black & White	enhanced geometries, inner geometries first

portabicchieri in acrilico tagliato laser

Fase 2

Step 2: Laser process

For a perfect result we recommend to use the acrylic cutting grid table or the acrylic slat cutting table. It avoids back reflections on the material. Position the acrylic sheet into your laser, remove the protection foil and cover the rest of the table to maximize the exhaust power.

Laser Parameters:

Colour	Process	Power (%)	Speed (%)	ppi/Hz
black	engrave CO₂	18	20	500
red	cut CO₂	100	0,9	1000

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-
1	on	-	-

INFO:

We used the standard laser parameters from Jobcontrol^® optimized for speed.
The material parameters of JobControl^® can be downloaded from www.troteclaser.com

porta bicchieri per il vino taglio laser

Fase 3

Step 3: Post-processing

Clean the glass holder with some water and dish-soap.

Inspirations

According to your personal taste you can get even more perfect results by using the laser parameters "Quality"
On dark acrylic you can achieve particularly good results with the fiber laser source of the Speedy flexx
If you use a 1,.5" lens, the engraving becomes very bright. A 3 mm material can also be cut with this lens.
Furthermore, you can also UV-print the material. Our JobContro^l® Vision supports you in cutting out the printed sheets with highest precision.

Serie Speedy
L’incisore laser e la laser cutter ideali per la personalizzazione.

Scoprite incisori laser e laser cutter

Avete domande sulle applicazioni o sulle impostazioni?
Siamo lieti di consigliarvi dalla A di Air Assist alla Z di offset Z.

Contattaci