Acrylic glass holder

Use acrylic to make an individual glass holder.
To browse full engraving material range, please visit www.trotec-materials.com

Förberedelse

Required material
  • 1 sheet of 3 mm TroGlass Satins
    (available at Trotec
  • Material to cover the engraving table (e.g. paper)
  • Paper tape
Machine used
  • Speedy 360 flexx
  • 80 Watt with 2" lens

For this sample you only can use any laser machine from the Speedy series.

Important
  • Use the acrylic cutting grid table or the acrylic slat cutting table
  • Remove the protection foil from the side of the acrylic that you want to engrave. Leaving on the bottom protects the acrylic sheet from scratches during handling.
Acrylic Glass Holder

PDF

Ladda ner nu

Steg för steg

plexiglass glass holder laser cut
Steg 1

Step 1: Import /create design template

Import our design template into your graphic program and adapt it according to your requirements.

Print settings

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Black & White enhanced geometries,
inner geometries first
acylic laser cut glass holder
Steg 2

Step 2: Laser process

For a perfect result we recommend to use the acrylic cutting grid table or the acrylic slat cutting table. It avoids back reflections on the material. Position the acrylic sheet into your laser, remove the protection foil and cover the rest of the table to maximize the exhaust power.

Laser Parameters:

Colour Process Power (%) Speed (%) ppi/Hz
black engrave CO2 18 20 500
red cut CO2 100 0,9 1000
Passes Air Assist Z-Offset Advanced
1 on - -
1 on - -

INFO:

  • We used the standard laser parameters from Jobcontrol® optimized for speed.
  • The material parameters of JobControl® can be downloaded from www.troteclaser.com
wine glass dispenser laser cut
Steg 3

Step 3: Post-processing

Clean the glass holder with some water and dish-soap.

Inspirations

  • According to your personal taste you can get even more perfect results by using the laser parameters "Quality"
  • On dark acrylic you can achieve particularly good results with the fiber laser source of the Speedy flexx
  • If you use a 1,.5" lens, the engraving becomes very bright. A 3 mm material can also be cut with this lens.
  • Furthermore, you can also UV-print the material. Our JobContro Vision supports you in cutting out the printed sheets with highest precision.

Speedy-serien
Den optimala lasergraveraren och -skäraren för personalisering.

Upptäck våra lasergraverare och laserskärare

Har du frågor om applikationer eller inställningar?
Vi hjälper gärna till med allt från Air Assist till Z-offset.

Kontakta oss
Stolt medlem av troGROUP Logo