Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
With Trotec laser cutting and engraving machines, you can cut, engrave or mark a wide range of materials. These include: plastic, wood, rubber, leather, metal, textile and many others. In the table below, you can see details about the material processing capabilities of our laser engraving and laser cutting machines. The list of materials is structured according to processing type (cutting, engraving, marking).
Material | cutting | engraving | marking |
---|---|---|---|
Metal | |||
Aluminum | ⚫ | ⚫ | |
Aluminum, anodized | ⚫ | ⚫ | |
Chromium | ⚫ | ⚫ | |
Precious metal | ⚫ | ⚫ | |
Metal foils up to 0.02" (Aluminum, Brass, Copper, precious metal) | ⚫ | ⚫ | ⚫ |
Stainless steel | ⚫ | ⚫ | |
Metal, painted | ⚫ | ||
Brass | ⚫ | ⚫ | |
Copper | ⚫ | ⚫ | |
Titanium | ⚫ | ⚫ | |
Plastic | |||
Acrylic/PMMA, i.e. PLEXIGLAS® | ⚫ | ⚫ | ⚫ |
Rubber | ⚫ | ⚫ | |
Polyamide (PA) | ⚫ | ⚫ | ⚫ |
Polybutylene terephthalate (PBT) | ⚫ | ⚫ | ⚫ |
Polycarbonate (PC) up to 0.02" | ⚫ | ⚫ | ⚫ |
Polyethylene (PE) | ⚫ | ⚫ | ⚫ |
Polyester (PES) | ⚫ | ⚫ | ⚫ |
Polyethylene terephthalate (PET) | ⚫ | ⚫ | ⚫ |
Polyimide (PI) | ⚫ | ⚫ | ⚫ |
Polyoxymethylene (POM) -i.e. Delrin® | ⚫ | ⚫ | ⚫ |
Polypropylene (PP) | ⚫ | ⚫ | ⚫ |
Polyphenylene sulfide (PPS) | ⚫ | ⚫ | ⚫ |
Polystyrene (PS) | ⚫ | ⚫ | ⚫ |
Foam (PVC free) | ⚫ | ⚫ | ⚫ |
Miscellanious | |||
Wood | ⚫ | ⚫ | |
Mirror | ⚫ | ⚫ | |
Stone | ⚫ | ||
Paper (white) | ⚫ | ⚫ | ⚫ |
Paper (colored) | ⚫ | ⚫ | ⚫ |
Food | ⚫ | ⚫ | ⚫ |
Leather | ⚫ | ⚫ | ⚫ |
Fabric | ⚫ | ⚫ | |
Glass | ⚫ | ||
Ceramics | ⚫ | ⚫ | |
Cardboard | ⚫ | ⚫ | ⚫ |
Cork | ⚫ | ⚫ | ⚫ |
* List of materials is based on a Trotec flexx laser. Flexx laser machines combine a CO2 and a fiber laser source in one machine.
For more details on the cutting, marking and engraving capabilities of our CO2 lasers or fiber lasers, please refer to the sheet below.
You are not sure whether your material is suitable for laser processing? Are you looking for information on a material that was not on the list? The list gives you a general overview of which materials can be processed with the laser. We would be pleased to check special requirements for your laser application in a material and application test.