Business card box
laser engraved

Step by step guide

business card box laser engraved

Förberedelse

Required material

We used a business card box out of anodized aluminium

Used Trotec Laser
  • Speedy 300
  • 60 watts
  • 2.5 inch lens
Tips
  • 1000 ppi support very detailed engravings
  • Help yourself with a jig for easy positioning
Business Card Box

ZIP

Ladda ner nu
Business Card Box

PDF

Ladda ner nu

Steg för steg

Steg 1

Step 1: Laser cut the acrylic jig

Open the template file and send it to the laser. The laser parameters may vary, as they depend on the machine used and the available laser power.

Page 1 is the engraving for the outer surface of the box, page 2 shows the calendar and page 3 contains the jig.

Recommended cutting parameters:

Red: power 80 %, speed 0.60 %, frequency 5000 Hz, Air Assist on

Steg 2

Step 2: Laser engrave the business card box

Use the jig for a better positioning and start with the engraving.

Recommended engraving parameters:

Black: power 30 %, speed 30%, frequency 1000 ppi, Air Assist on

Download here the file for the ProMarker - with the high speed galvo laser the marking time is up to ten times shorter.

Speedy-serien
Den optimala lasergraveraren och -skäraren för personalisering.

Upptäck våra lasergraverare och laserskärare

Har du frågor om applikationer eller inställningar?
Vi hjälper gärna till med allt från Air Assist till Z-offset.

Kontakta oss
Stolt medlem av troGROUP Logo