Bottle display made of printed TroGlass XT

Create an original bottle display from TroGlass XT. Extruded acrylic has a constant material thickness and is therefore suitable for applications where parts have to be put together.


Used material
  • 3mm TroGlass XT
Machine used
  • Speedy 360
  • 80 watts
  • 2" lens
  • white acrylic gutting grid

This sample can be made with the Speedy 300 and Speedy 400 laser engraver with the JobControl® Vision software.

Copyright notice:

This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license "Pineapple" and "Pineapple pieces". We assume no liability for illegal actions.

Acrylic Bottle Display


Download now

Step by step

Step 1

Step 1: Import graphic files and print

Import our template and adapt it to your requirements. We print the design to the back of the acrylic with an UV-printer. With the registration marks the JobControl Vision camera system will recognize the position and cut precisely along the contour.

Step 2

Step 2: Design acrylic

Import our template and adapt it to your requirements. Before drawing the final connections measure the kerf. For this make a test cut with a suitable parameter and lens. TroGlass XT comes with a consistent material thickness. Hence you can transfer the testing results to all future designs when using the same laser settings.<br/> Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Vector Job 500dpi none
Halftone Others
- Optimized Geometries, inner geometries first
Step 3

Step 3: Laser process

The laser parameters may vary depending on the type of laser machine and available laser power.

Laser parameters:

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 70 0,4 15.000
Passes Air Assist z-Offset Direction Advanced
1 ON - - -
Step 4

Step 4: Assembly

Assemble the individual parts and add the product you want to promote.

Why should I use TroGlass XT?

TroGlass XT is that product, that all model makers, interior and exterior designers, and signage and display manufacturers are waiting for.
It's a transparent, extruded acrylic glass with fantastic light transmission, excellent resistance to outdoor weathering, and low thickness tolerance.

Trotec Materials

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo