Wall Decoration - Letters

Create a wall decoration using TroGlass laser acrylic and signage mounting devices. These materials can be purchased from our engraving supplies website.


Material used
  • 3 pieces of TroGlass acrylic in different colours
  • Distance holders R15-15-FL
Laser cutting machine used
  • Speedy 400
  • 120 watts
  • 2" lens
  • Vacuum table with acrylic cutting grid table

Any Speedy laser engraver series can be used to create this sample.

Wall Decoration Letters


Download now

Step by step

Step 1

Step 1: Import the graphic file

Start by importing our template and adapting it to your requirements. Send each of the jobs to the laser using the driver settings below.

Print Settings

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Colour Optimised Geometries, inner geometries first
Step 2

Steps 2: Laser cutting

The following parameters will vary depending on your laser machine and the available laser power. 

Laser cutting:

Colour Process Power (%) Speed (%) ppi/Hz
red Cut CO2 100 1.2 5000
Passes Air Assist Z-Offset Direction Advanced
1 ON - - -
Step 3

Step 3: Assembly

With the back plate mark the drill holes in your wall. After that place the plate to the wall and fix it in place with the distance holders. Now add the coloured acrylic letters to the distance holders and secure them using an Allen key. This is a simple way of creating displays.

There is no limit to your creativity when creating signage or displays. Use different designs, fonts and more to create stand out artworks. 

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud member of troGROUP Logo