Covid-19 Signs

Here you will find templates for the quick creation of Covid-19 signs from TroLase, TroLase Foil and TroGlass.


Materials required

Wash your hand's sign - Variant 1

  • 1/4 sheet TroLase black/yellow 1.6 mm L704-206
  • 1/4 sheet TroLase blue/white 1.6 mm L512-206 with double-sided adhesive foil on the back
Materials required

Wash your hand's sign - Variant 2

Materials required

Keep your distance sticker

Laser engraving machine used:
  • Speedy 300
  • 80 watts
  • 1.5" lens
  • Aluminium cutting grid table or honeycomb cutting tabletop

This sample can be produced with any other Speedy laser engraving machine.


When working with TroLase or TroLase Foil, if you are using the entire work surface, a vacuum table or an adhesive mat can be used so that the material lies flat over the entire surface. Otherwise, cover the work surface with paper to create an optimal vacuum.


Download now

Step by step

Step 1

Step 1: Import/Create Print & Laser Template

You can either use our pre-made template or create your own design files. Use the settings below to send the job to the laser.
Important: If you use TroGlass Reverse, the file must be mirrored.

Print settings

Process mode Resolution Cut line
standard 500dpi none
Halftone Other
- Optimised geometries,
inner geometries first
Step 2

Step 2: Laser engraving and cutting

The next step is to create the parameter settings. Our suggested parameters will differ depending on the laser engraving machine used and the available laser power. Before processing the TroLase and TroLase Foil sheets the protective foil should be removed before placing it into your laser. If TroGlass Reverse is used, we recommend removing the foil after laser processing. 

Laser Parameters:

Material Colour Process Power (%) Speed (%) ppi/Hz Passes Air Assist Z-Offset Direction Advanced
TroLase Foil black Laser Engraving CO2 55 80 500 1 off 1.5 bottom to top -
  red Laser Cutting CO2 40 1 2000 1 on 0 - -
TroLase black

Laser Engraving CO2

65 80 600 1 off 1.5 bottom to top -
  red Laser Cutting CO2 60 1 2000 1 on 0 - -
TroGlass Reverse black Laser Engraving CO2 18 20 500 1 on 0 bottom to top -
   red Laser Cutting CO2 60 1 2000 1 on 0 - -
Step 3

Step 3: Assembly

To attach the parts to each other, first remove the protective film on the back of the blue TroLase shield. Now stick the TroLase label onto the yellow TroLase or the white TroGlass Reverse label according to the markings.
The signs are now ready for use!

These signs can be produced in any colour material.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo