Laser engraved agate pendant

Follow our tutorial to engrave a piece of agate using your Trotec laser machine.

Preparation

Materials required

Agate disks
Leather band

Laser machine used

Speedy 360, 100 Watt
1.5" lens
Vacuum table

Create this sample using any Speedy laser engraver.

Tip

We used the 1.5" lens for this sample because we wanted to engrave a filigree design.

Agate Pendant Parameters

ZIP

Download now

ZIP

Download now

Agate Pendant Lasameter

ZIP

Download now

ZIP

Download now

Step by step

The stone pendant displayed in the graphic software

Step 1

Step 1: Creating/importing the graphic

Start by either creating your own design or using our template. We scanned our agate disk to adapt our design directly to the shape of the stone. Send the job to the laser using the settings below.

Print settings

Process mode	Resolution	Cut line
Standard	1000 dpi	none

Halftone	Others
Colour

TIP:

To achieve a perfect result for our detailed graphics we used the highest possible resolution of 1000 dpi when laser engraving.

Step 2

Step 2: Laser engraving the agate

Position the agate disk onto your laser machine bed and focus on the surface. If the stone is rounded, focus on the average value of the engraving area. Next you should create the material parameter settings. These parameters can vary depending on your laser machine and its available laser power.