--------------------------

Fire evacuation sign

Use Trotec's TroLase Textures to engrave this fire evacuation sign.

Fire evacuation sign

Use Trotec's TroLase Textures to engrave this fire evacuation sign.

Preparation

Required material:
  • TroLase Textures 1/16" in Yellow/Black, half or quarter sheet
Machine used:
  • Speedy 400 120W with 2" lens and aluminum cutting grid table

For this sample you only can use any laser engraver and cutter from the Speedy series.

Graphic files

ZIP

Download now

Step by step

Step 1

Sending job to the laser

Begin by either creating your own design or using our ready made template. You can now send the job to the laser using the below settings. 

Print Settings

Process mode Standard
Resolution 500dpi
Cut line None
Halftone Ordered Dithering
Others Enhanced geometries, Inner geometries first
Step 2

Laser cutting and laser engraving your sign

Send your design to the laser with the recommended laser parameters. Please note that these parameters may vary depending on the laser machine used and the available laser power.

Laser Parameters

  Engraving Cutting
Color Black Red
Process Engrave Cut
Power (%) 100 80
Speed (%) 40 2
ppi/HZ Auto PPI 1000
Passes 1 1
Air Assist ON ON
Z-Offset 0.16 -
Direction Top down -
Path Planning - Standard
Advanced Default Default
Step 3

Cleaning the finished sign

When laser processing is finished wipe down your finished sign with Hexanes or other suitable cleaner to remove any leftover residue. Your sign is now complete and ready to be hung!

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo