Acrylic Lamp
Cut with a Laser

The construction of the arylic lamp provides a marvelous light reflection. Create this unique decoration with your laser cutter and experiment with light and shade.

acrylic lamp laser cutting
acrylic lamp laser cutting


Required material

3 mm acrylic

Trotec laser used
  • Use the 2.0" lens for an accurate cut quality
  • We used Evonik's PLEXIGLAS® Radiant


Download now
Acrylic Lamp


Download now

Step by step

Step 1

Step 1: Laser cut the acrylic lamp

Used cutting parameters:

Blue: power: 100 %, speed 0.7 %, frequency 9000 Hz, Air Assist on
Red: power: 60 %, speed 1.0 %, frequency 9000 Hz, Air Assist on, z-offset 3 mm

First, you'll need to download the template file for this wonderful piece of furniture and send it to the laser.

Then choose your favourite colour and starting cutting the acrylic that the lamp will be made out of. The parameters you use to cut will differ depending on your machine and the laser power you have available. To fit the socket of the light bulb, emboss the edge with cutting lines. This is an alternative to engraving the area, and thanks to defocusing, the laser beam is wider and the cutting lines overlap. This method allows you to achieve an engraving effect with cutting lines.

Step 2

Step 2: Assemble the acyrlic lamp

Assembling the acrylic lamp is easy. The assembling instruction helps.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo