See our lasers in action!
Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Available for:
SpeedMarker Series
ProMarker Series
With the height adjustment, you adjust your marking laser to different workpiece heights. Laser focusing will thus be successful for any application.
The standard (and optional) z-axis is different, depending on the laser system:
Laser system | standard z-axis | optional z-axis |
---|---|---|
SpeedMarker 100 | electrical z-axis | - |
SpeedMarker 300 | mechanical z-axis with crank | software-controlled z-axis |
SpeedMarker 700 | electrical z-axis | software-controlled z-axis |
SpeedMarker 1300 | software-controlled z-axis | - |
ProMarker 100 | lifting table | electrical z-axis |
ProMarker 300 | mechanical z-axis with crank | software-controlled z-axis |