Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
In this decorative DIY, we'll go step-by-step to create a unique Christmas Tree decoration, complete with an acrylic bauble! Download your templates and instructions here, and be ready for the festive season.
Feel free to try this DIY with any machine in the Trotec Laser speedy series
Consider trying different wood styles from the Trotec Laser wood range, or different colours from the TroGlass range. This way you will be able to offer your customers even more individuality and flexibility, with a wide variety of colourful options.
Start by cutting out the template or your own unique design! We recommend using the following print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500dpi | None |
Halftone | Others |
---|---|
Color | Optimal geometries, inner geometries first |
Be careful when cutting the base plate for your tree, in order that it will fit snugly and hold firm once assembled. Always measure the thickness of your material before starting to cut. As a guideline, you can start with a cutting gap of approximately 0.2mm when cutting with a 2inch lens.
Next. enter the parameter settings. As always, laser parameters may vary depending on the machine used and the power available.
Laser Parameters | Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|---|
Engraving | Black | Engrave CO2 | 50 | 50 | 500 |
Cutting | Red | Cut CO2 | 95 | 0.8 | 1000 |
Laser Parameters | Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|---|
Engraving | 1 | On | +4mm | Down | - |
Cutting | 1 | On | - | - | - |
For more contrast in the engraving, lift the Z-Offset to about +4mm.
Use our template of designs past, or put together a unique one all your own! Send the graphics to the laser machine with the following print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500dpi | None |
Halftone | Others |
---|---|
Color | Optimal geometries, inner geometries first |
Send the parameters for your bauble decoration to the laser machine. Here again, the settings may be different depending on the laser machine used and power available.
Laser parameters: Cutting
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Red | Cut CO2 | 50 | 0.2 | 5000 |
Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | On | 0 | - | - |
Place the tree in the base plate, and hang the bauble from its outstretched branch. ou now have your own festive decoration! Ho-Ho-Holy Moley, that looks great!
Trotec's engravable wood range has been specifically developed for laser processing. Both the solid wood and our veneered wood panels, as well as our plywood and MDF materials allow for fine engraving and a beautiful cut with the laser.
Likewise, our TroGlass and TroGlitter range provide a range of exciting, colorful acrylics, sure to catch your customer's eye!
Why not try the tree in various sizes and colours? Or covered in baubles and decorations you design yourself? With a Trotec laser, there are no limits to your creativity!