Quick and easy control of your laser machine

How can I stop, restart or cancel the current job?

How can I stop and resume the current job?

Directly in the laser software:

Open the JobControl laser software and select the "Start/Pause" button to stop a running job.

On the control panel:

Press the "Start/Pause" button directly on the laser machine's control panel to stop the current job.
There are many advantages to pausing the current laser job. For example, you can open the cover and manually move the laser head or axes and check the quality of the engraving or the cut. If you are pleased with the result and want to continue the job, select the "Start/Pause" button again. The laser will move to the original position where it was stopped and continue the job.

How can I cancel the current job?

Directly in the laser software:

Go to the JobControl software and click on the "Stop" button in the lower right area of the screen.

On the laser machine's control panel:

Press the "Stop" button to cancel the laser job immediately.

Open the laser machine:

If you open the cover of the laser during processing, the safety circuit is interrupted and the job will be cancelled.
If you stop a job by clicking or pressing the "Stop" button, the job must be restarted from the beginning. It is not possible to continue the job at the point where it was stopped previously.

Get personal support from our laser experts.

Technical support
Proud member of troGROUP Logo