Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser marking of products and electronic components
Line and 2D codes, like serial numbers, are already used in most industries, such as (e.g. the automotive industry, medical technology, or electronics industry), in order to make products or individual parts traceable. The codes (mostly data matrix or bar codes) contain information regarding the parts properties, production data, batch numbers and much more. Such component marking must be readable in a simple manner and partially also electronically and have a lasting durability. Here, laser marking proves to be a flexible and universal tool for a wide variety of materials, shapes and sizes as well as the processing of dynamic and changing data. Parts are laser-marked at the highest speed and absolute precision, while wear is minimal.
Components, parts or products of all types of metals e.g.:
Components, parts or products of plastics e.g.:
Depending on requirements, metals and plastics can either be laser marked or laser engraved.
Part labeling based on specifications:
In contrast to the design of parts in creative industries, codes and serial numbers often have to be applied to the products in accordance with customer specifications or legal requirements in industry (e.g., the automotive and supply industry, the electronics industry, medical technology, etc.).
The marking of the parts thus does not increase the profit. This means that the marking must be as cost-efficient as possible. Here, laser marking also offers unbeatable advantages, since no setup costs or elaborate and expensive preparatory work are required. No matter whether 1 or 1000 parts - the cost per laser marking is always at the same low level.
Automatic code and serial number generation with ERP connection
With Trotec marking lasers you can label your parts precisely. The laser systems distinguish themselves through their high service life. In addition, the included SpeedMark marking software is able to communicate with external systems such as databases or ERP systems (such as SAP) and enables a continuous code generation. However, except for a brief training by the Trotec team, no prior knowledge is necessary. You can easily laser mark your products or components either by direct input or with fully automated program sequences.
Trotec laser machines are built for intensive use over many years and therefore have a particularly rugged design. Moreover, we only use components of the highest quality from leading manufacturers that ensure reliability and a constant high quality.