- 3mm TroGlass XT
- Speedy 360
- 80 watts
- 2" lens
- white acrylic gutting grid
This sample can be made with the Speedy 300 and Speedy 400 laser engraver with the JobControl® Vision software.
Step 1: Import graphic files and print
Import our template and adapt it to your requirements. We print the design to the back of the acrylic with an UV-printer. With the registration marks the JobControl Vision camera system will recognize the position and cut precisely along the contour.
Step 2: Design acrylic
Import our template and adapt it to your requirements. Before drawing the final connections measure the kerf. For this make a test cut with a suitable parameter and lens. TroGlass XT comes with a consistent material thickness. Hence you can transfer the testing results to all future designs when using the same laser settings.
Send the job to the laser using the driver settings below.
|Process mode||Resolution||Cut line|
|-||Optimized Geometries, inner geometries first|
Step 3: Laser process
The laser parameters may vary depending on the type of laser machine and available laser power.
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
Step 4: Assembly
Assemble the individual parts and add the product you want to promote.
TroGlass XT is that product, that all model makers, interior and exterior designers, and signage and display manufacturers are waiting for.
It's a transparent, extruded acrylic glass with fantastic light transmission, excellent resistance to outdoor weathering, and low thickness tolerance.