Laser engraved trophy label made of TroLase Foil

Learn how you can make an individual trophy sticker with a Speedy flexx and TroLase foil.

trolase foil laser engraving
trolase foil laser engraving


You Will Need
  • Any choice of 1/4 sheet TroLase Lights
  • Spare material to cover the engraving table

You can use any material you'd like from the TroLase Lights range.

Machine Used
  • Speedy 360 flexx, 80/30w
  • 2.85" lens
  • Vacuum table & honeycomb cutting table

Keep in mind that you can produce this sample using any machine from the Trotec Speedy series, and it doesn't necessarily need to be a flexx machine.


We decided to engrave this with a fiber laser due to the intricacy of the design. Due to the fiber laser's tiny spot size, we found this helped to achieve better results. However, fiber will only work on ‘metallic’ Trotec materials.

When you use the CO2 laser it might be harder to achieve the sharpest, finest details, but you will be able to process any TroLase Light you'd like. 

Trophy Label


Download now

Step by step

print settings trolase foil
Step 1

Step 1: Import the Design

Have a go at creating your very own design, or you can feel free to import the template we have provided. Then, adapt it to the size of your trophy and send it to the laser machine using the following driver settings:

Process Mode Resolution Cut Line Halftone Others
Standard 1000dpi None Colour -

Remember: When engraving with a fiber laser, always use 1000dpi for your resolution. It will work better when combined with the small spot size of the fiber laser. 

laser engraving trolase foil
Step 2

Step 2: Laser Process - Label

Place your chosen TroLase Lights into your laser engraving machine and focus on the material. Then, it's time to create the parameter settings. Please note that the settings we have provided may vary depending on which Trotec machine you are using and its available laser power. 

Laser Parameters - Engraving:

Colour Process Power (%) Speed (%) ppi/Hz
Black Engrave FLP 20 55 30,000
Passes Air Assist Z-Offset Advanced
1 ON 0mm -

Laser Parameters - Scratching:

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 8 1 1000
Passes Air Assist Z-Offset Advanced
1 ON 4mm -

Laser Parameters - Kiss-Cut:

Colour   Process Power (%) Speed (%) ppi/Hz
Blue Cut CO2 9 1 1,000
Passes Air Assist Z-Offset Advanced
1 ON - -

Laser Parameters - Cutting:

Colour Process: Power (%) Speed (%) ppi/Hz
Green Cut CO2 40 2 1,000
Passes Air Assist Z-Offset Advanced
1 ON - -


The best thing about the fiber laser here is the significantly smaller spot size. This means that less heat is being applied to the material, so the material should remain flat and not warp.

cleaning trolase foil
Step 3

Step 3: Cleaning

Now, you just need to give the label a quick clean with a damp cloth. This works best if you leave the material inside the engraving machine with the exhaust activated.


TroLase Lights come in many different colours and textures. Have a browse through our webshop and be inspired for your next laser project. 

TroLase Lights can also be used for exterior use, including things like mailbox labels, doorbell name plates, etc...

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud member of troGROUP Logo