Wood Veneer Puzzle
Create your own puzzle.
- Trotec veneered wood
You can also use Trotec's solid wood panels, or your own preferred material.
- Speedy 400 120W
- 2" lens
- Aluminum cutting grid table
You can also use any other laser in our Speedy laser engraver series to create this application.
Step by step
Step 1: Import file and adjust settings
Import the downloaded file into your preferred graphic software and send the job to the laser with the following settings:
|Process mode||Resolution||Cut line|
|Color||enhanced geometries, inner geometries first|
Step 2: Process with the laser
Load your Trotec veneered wood or preferred material into the laser bed, focus, and start the cutting process.
|Color||Process||Power (%)||Speed (%)||Ppi/Hz|
Keep in mind that these settings are for a 120W laser, so you may need to adjust your parameters based on the wattage of your laser machine: how to find the best parameters for your laser
Step 3: Assemble
Remove the laser cut parts from the bed and adhere the bottom puzzle base to the top puzzle layer without the puzzle pieces. Use your preferred type of wood glue and clamp until dry. Now it's time to play!