Laser Engraved Brick

Find out how you can make a unique, individual present using nothing but a simple brick and your laser machine!



You Will Need
  • Regular clay brick
Machine Used
  • Speedy 360, 100W
  • 1.5" lens
  • Vacuum table

You can create this sample on any machine from the Speedy series.


We used a 1.5" lens because our design has many fine details. For simpler designs, you only need to use the 2" lens.

Laser Engraved Brick


Download now
Engraved Brick Parameters


Download now

Step by step

laser-engraved-brick print settings
Step 1

Step 1: Import Your Design

Create the design you want to engrave on the brick! Or, feel free to import our available template. Send the job to the laser machine using the driver settings below:

Print Driver Settings

Process Mode Resolution Cut Line
Standard 500 dpi None
Halftone Others
Step 2

Step 2: Engraving Your Brick

Place the brick inside your Trotec laser machine and focus carefully on the surface of the material. Enter the parameter settings - these can vary depending on the laser machine you are using and its available laser power.

Laser Parameters, Engraving

Colour Process Power (%) Speed (%) ppi/Hz
Black Engrave CO2 100 30 500
Passes Air Assist Z-Offset  Advanced
1 on +1 mm High Quality
Step 3

Step 3: Cleaning

Clean the surface of your brick with a wet sponge - there will be a lot of dust!



You can customise the bricks with names, dates and simple pictures!

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud member of troGROUP Logo