Customise an ordinary, conventional door mat using your Trotec laser machine and a whole lot of creativity!
You Will Need
- 1x Single-Coloured Door Mat
Seeing as the structure and texture of the door mat is quite coarse, we decided to use a lens with a very long focal length. This compensated for the unevenness of the material.
Step 1: Import Design
Have a go at creating your own design, or you are always free to import our template. Then, send the job to your laser engraver using the following driver settings:
Seeing as a door mat is usually something that is viewed from a significant distance, we suggest using a lower resolution. This will reduce your production time significantly.
Step 2: Engraving the Door Mat
Place the door mat inside your Trotec laser machine and create the parameter settings. Please note that our recommended settings can differ depending on the laser machine you are using and its available laser power.
LASER PARAMETERS - ENGRAVING:
Since a door mat is usually viewed from a significant distance, you are only required to use a resolution of 333dpi. It will speed up your job.
- You can engrave company logos, sport clubs and organisations - extend your customer base!
- Slogans for private builders or someone's first home are perfect ideas for door mat content