Lasercut and engraved
Christmas trees

We show you how to make a personalized Christmas tree with simple cardboard.
In the PDF termplate you will find 2 versions:

Our big Christmas tree is about 1 meter high. And the small version can be used as table decoration in any size.

cardboard christmas tree laser cutter

Preparation

Big Christmas Tree
  • You will need: 5mm corrugated cardboard
  • Trotec laser used: SP500, 200 watts
Small Christmas Tree
  • You will need: 2mm corrugated cardboard
  • Trotec laser used: Speedy 300, 30 watts, 2.0" lens
Christmas-Trees.zip

ZIP

Download now
Cardboard Christmas Tree

ZIP

Download now

Step by step

lasercut christmas tree
Step 1

Step 1: Big Christmas Tree

We used an SP500 to cut our Christmas tree, along with 1300 x 750mm cardboard. You can always optimise the design of the tree according to your size limitations and personal preferences – the sky is your only limit! Once you've finished processing the cardboard, you simply need to assemble the actual tree. The following guide will show you how to do this. 

Big Christmas Tree Manual

You can then decorate the tree with classic Christmas baubles and fairy lights - or let the kids go crazy with some paints or crayons!

Step 2

Step 2: Laser Parameters (Big Tree, 5mm Cardboard)

Laser Settings:

Cutting: Power: 85% - Speed: 2% - Frequency: 1000 Hz - Air-Assist: ON - Z-Offset: -1.5mm

Tip:

The tree can be assembled without any glue or fastenings, so you can even take the tree apart after Christmas and use it again next year!

Cardboard decoration
Step 3

Step 3: Small Tree

This smaller Christmas tree is made up of only two parts, which are stuck together nice and securely. It's up to you what size you want this tree to be - our pictured tree is 12cm high

Step 4

Step 4: Laser Parameters (Small Tree, 2mm Cardboard)

Laser Settings:

Engraving: Power: 40% - Speed: 100% - Frequency: 500ppi - Z-Offset: 6mm -Air-Assist: ON
Cutting: Power: 20% - Speed: 1% - Frequency: 1000 Hz - Air-Assist: ON

Tip:

We recommend using the vacuum table alongside the honeycomb tabletop for this particular job.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo