Felt and Leather
Christmas Boot

Step by step guide

christmas boot laser cut from felt

There are numerous creative laser ideas for the Advent season: Surprise your loved ones with a Christmas boot cut with the laser from leather and felt, filled with Christmas delicacies.

Preparation

Required material
  • red polyesterfelt, approx 4mm
  • white Alcantara leather
  • green wool, approx. 2 mm thick
Used Trotec Laser
Tips

We recommend the use of 100% polyester felt as it is especially suited for processing with the laser.

Textile Christmas Boot

PDF

Download now
Christmas Felt Boot

ZIP

Download now

Step by Step

Step 1

Step 1:

Open the file "Christmas boot" and send it to the laser. The boot is made from two different materials; we have started with the red boot. The red felt is engraved and cut.

LASER SETTINGS

  • Engraving (black) - Power: 20 %, speed: 50 %, resolution: 500 ppi
  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz

The parameters depend on the used machine and the available laser power; they might therefore vary.

Step 2

Step 2:

Next, we laser cut the brim of the boot.

LASER SETTINGS

  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz.

The parameters depend on the used machine and the available laser power; they might therefore vary.

Step 3

Step 3:

Now all you need is a thick wool thread to stitch the different parts together.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud Member of troGROUP Logo