Acrylic Lamp
Cut with a Laser

The construction of the arylic lamp provides a marvelous light reflection. Create this unique decoration with your laser cutter and experiment with light and shade.

acrylic lamp laser cutting
acrylic lamp laser cutting


Required material

3 mm acrylic
Acrylic can be purchased through the Trotec webshop.

Trotec laser used
  • Speedy 300
  • 60 watts
  • 2.0 inch lens
  • Use the 2.0" lens for an accurate cut quality
  • We used Evonik's PLEXIGLAS® Radiant


Download now
Acrylic Lamp


Download now

Step by step

Step 1

Step 1: Laser cut the acrylic lamp

Used cutting parameters:

Blue: power: 100 %, speed 0.7 %, frequency 9000 Hz, Air Assist on
Red: power: 60 %, speed 1.0 %, frequency 9000 Hz, Air Assist on, z-offset 3 mm

Open the template file for this extraordinary design and send it to the laser. Select your favourite colour and start cutting the acrylic. The laser parameters may vary, as they depend on the machine being used and the available laser power.

To fit in the socket of the light bulb, emboss the edge with cutting lines. This is an alternative to engraving the area. By using the defocussing feature, the laser beam can be made wider forcing the cutting lines to overlap. This is how we can create the engraving effect using cutting lines.

Step 2

Step 2: Assemble the acyrlic lamp

Assembling the acrylic lamp is easy. The assembling instruction helps.

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo