Directly in the laser software:Open the JobControl laser software and click the "Start/Pause" button to stop a running job.
On the control panel:Press the "Start/Pause" button directly on the laser machine's control panel to stop the current job.
Pausing the current laser job offers many advantages. You can open the cover and manually move the laser head or axes. You can e.g. check the quality of the engraving or the cut. If you are pleased with the result and want to continue the job, click or press the "Start/Pause" button again. The laser then moves to the original position, where it was stopped, and continues the job.
Directly in the laser software:Go to the JobControl software and click on the "Stop" button in the lower right area of the screen.
On the laser machine's control panel:Press the "Stop" button to cancel the laser job immediately.
Open the laser machine:If you open the cover of the laser during processing, the safety circuit is interrupted and the job is cancelled.
If you stop a job by clicking or pressing the "Stop" button, the job must be restarted from the beginning. It is not possible to continue the job at the point that it was stopped.