--------------------------

Vision Print & Cut driver installation

Below you can find the camera driver installation steps for your Print & Cut option.

Please note:
For the driver installation you need local computer Admin rights.
This procedure is not needed on Run on Ruby System.

How to identify the camera

Take a look at the backside of your Trotec Print and Cut camera.
If you see a barcode sticker, follow the guide for the Allied vision camera.

If there is no sticker on your camera, please follow the guide for IDS camera.

IDS camera installation

  1. Download camera driver from here. In case you see a “trust” message from your web browser, please follow this link for help.
  2. UNPLUG the camera from the X-Axis before you run the installation
  3. Execute the file (admin rights are required) and select “2” to install the USB driver
  4. After the driver was installed correctly press “ENTER” to close the window.

The installation is now finished, your camera is now working with Ruby.

Allied Vision camera

  1. Download drivers from here.In case you see a “trust” message from your web browser, please follow this link for help.
  2. Execute the file (admin rights are required) and the driver will start to install automatically.
  3. As soon as the driver installation is finished, an Explorer window will pop up. Execute “AlliedVisionInstaller”.
  4. If this window shows up, click on install
  5. The driver register will start automatically. Make sure, it added the driver successfully!
  6. Continue with any key and exit the next window with Enter.

The installation is now finished, your camera is now working with Ruby.

FAQ Ruby® Laser Software

Get personal support from our Ruby® experts.

Contact support
Proud member of troGROUP Logo