Presentation box

made of TroLase ADA Signage


Required material
Machine used
  • Speedy 400, 120 Watt
  • 2" lens
  • Vacuum table
  • Acrylic cutting grid for TroLase ADA Signage
  • Honeycomb cutting table for the foam

For this sample you can use any laser machine from the Speedy laser engraver series.

  • TroLase ADA Signage is well suited for these kind of boxes because it is elastic and the parts fit together well
  • Please make sure that the foam you are using is suited for laser engraving and cutting (no PVC or other prohibited materials)

Step by step

Step 1

Step 1: Import /create design template

First it is necessary to design your box or use our template. For the quick and easy creation of boxes, visit makeabox.io. Our box consists of the outer shell, a lid and a double foam insert. Once the design is done, send the graphic elements for the outer shell and lid to your laser using the following parameters:

Step 2

Step 2: Laser process box

We made the outer shell and lid out of ADA Signage, you can use the parameters saved in JobControl®  to get close to the correct parameters. The recommended parameters can vary depending on the laser machine used and the laser power of your machine. Position the ADA Signage on the acrylic cutting grid of your Trotec laser and cut the pieces out.

Step 3

Step 3: Design Foam

We used the Relief mode for the foam to achieve different engraving heights. This enables you to optimally position name tags in different heights in the box. To do so, you just have to define different grayscales in the graphic: The darker the colour, the deeper the engraving. Send the graphics to the laser using the following parameters:

Step 4

Step 4: Laser process foam

Position the foam in the Trotec laser and cover the rest of the working area. Engrave and cut the two pieces of the insert.

Step 5

Step 5: Cleaning & Assembly

Put the single pieces of outer shell and lid together. Insert the foam and equip it with your nametags. Also nametags of multiple layers can be excellently presented in this box. A description of how to make this sample is available on our website - Name Tags "Paolas Cupcakes"
The additional bar in the lid holds the presentation box in an oblique position. To transport the box (e.g. when visiting customers), just remove the bar from the lid, put it into the box and close the lid. Impress and amaze your customers with this elegant presentation box.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo