Flower Swing Made From Solid Wood

In only a few steps and minimal material you can make this flower swing from solid wood. The ideal present for Mother's Day!

Preparation

Required Materials

1 Sheet of solid alder wood (5mm)
Masking material

Machine Used

Speedy 360 (80W)
2" Lens
Aluminum cutting table

You can also produce this application with all other machines in the Speedy laser engraving series.

Additional Information

With the appropriate design settings, you are able to cut two flower swings using a single quarter (24" x 12") alder wood sheet.

trotec-flowerswing.zip

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import Design and Adjust Laser Settings

Import our graphics and adapt the file to your requirements. Our file is crafted for 5mm-thick material. For materials of other thicknesses, ensure to adjust the design elements accordingly. Using the following settings, send the file to your Trotec laser:

JobControl Settings:

Process Mode	Resolution	Cut Line:
Standard Job	333dpi	None

Halftone	Others
Color	Enhanced Geometries, Inner Geometries First

NOTE: We used a 333dpi resolution because less time was required for engraving.

Step 2

Step 2: Laser Cut and Engrave the Alder Wood

Insert the solid wood sheet into your Trotec laser, and cover the remaining working surface to maximize the vacuum's suction power on the wood sheet.

Then proceed to engrave and cut the job.

For a uniform look, you may also engrave the back sides of the pieces. To do this, remove the cut pieces and place them in the same position, with their back sides side facing upwards. You can now repeat the engraving job.

NOTE: The parameters may vary depending on the laser machine used and available laser power:

Laser Parameters:

Parameters	Color	Process	Power %	Speed %
Engraving	Black	Engrave CO₂	70	100
Cutting	Red	Cutting CO₂	100

ppi/Hz	Passes	Air Assist	Z-offset	Advanced
500	1	ON	+8mm	-
1,000	1	ON	0mm	-

Step 3

Step 3: Assembly

Insert the two parts of the flower swing into one another and then place the circular support plate on the structure.

Lastly, secure the flower swing to the ceiling with a cord and include your desired floral decoration.

You've now completed this lovely decoration for Mother's Day!

Why Should You Use Trotec's Laserable Wood?

The wood engraving sheets available at Trotec have been tested by our experts and specially selected for laser engraving and cutting. They are optimally-sized for use with a Trotec laser, and they have a high-quality appearance and homogenous wood structure.

Trotec lasers are designed to create detailed engravings and cuts on sheets comoposed of solid wood, wood veneer, plywood, TroCraft Eco, and medium-density fibreboard (MDF).

Depending on the selected laser settings and the wood structure, various optical effects can be achieved with a laser. For instance, you may create deep, white, and dark brown-coloured engraving.

Inspiration

Use a different solid wood variety or a 6mm MDF sheet from the Trotec product range for this DIY project, as these materials are stable and resilient. Be sure to adjust the notches for the connector if you select MDF.
Combine bright and dark solid wood varieties from the Trotec range to create a unique and natural look.
For a customized appearance, paint the wood parts on both sides before engraving (NOTE: MDF is the optimal material choice if you wish to build a painted flower swing).

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.