- Stainless steel cutlery
- Lego for positioning items in the machine
- Speedy 360 flexx
- 30 W fiber laser
- 2.85" lens
- vacuum table
Any machine in the Speedy Flexx laser engraver series may be used.
If positioning the material in the machine, be sure that the surface is as flat as possible, parallel to the table.
Step 1: Design
Use our design or make your own. Send the job to the laser with the below printer driver settings.
Printer driver settings:
|Process mode||Resolution||Cut line|
Step 2: Laser process
Check the parameters then set them. These settings may change based on the laser machine you use and the laser power available.
We used Lego bricks because they are extremely useful if you have to compensate for a variety of heights or have to define exact positions. They are particularly useful in situations where producing a template wouldn't make sense.
LASER PARAMETERS ANNEALING
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
Step 3: Post-processing
No post-processing is required. Your cutlery can still go into the dishwasher.