- 1/4 sheet TroGlass Metallic, Bright Silver
- Speedy 360 flexx
- 100 Watt with 1.5" lens
- Vaccuum table with acrylic cutting grid
For this sample you only can use any laser machine from the Speedy laser engraver series.
- To keep the kerf as small as possible, we used the 1.5" lens instead of a 2" lens
- Material thickness can vary slightly. Therefore please measure the thickness and adapt the recess if necessary.
Step 1: Import design
Import our graphic. Add your design to the base plate of the outer ring.
Send the job to the laser using the settings below.
|Process mode||Resolution||Cut line|
|Color||Optimized geometries, inner geometries first|
Step 2: Laser process
Define the necessary parameters. They might vary depending on the machine used and the available laser power.
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
We used the standard parameters for TroGlass optimized for quality.
Step 3: Assembly
In order to put the globe together, start off with the ring that has four outside notches (1) and put it carefully into the ring with two inner and two outer notches (2). Then, put the ball into the ring that has two long connectors (3). Now, put one of the two small rings (4) onto the outer ring (5). Then you insert the preassembled globe into the holder and fix it on the opposite side using the second ring (4). Finally, insert the globe into the stand (6).