Use the extra strong adhesive for the TroLase ADA Signage so that the slate board is securely fixed.
Step by Step
Step 1: Slate board
Create your own design or use our template for the weekly planner. Adapt the file to the size of the board you would like.
Next send the job to the laser using the driver settings below.
Print settings:
Process mode
Resolution
Cut line
Standard
500 dpi
none
Halftone
Others
Color
-
Step 2: Laser process slate
Choose your parameter seetings for the cuting and engraving. Keep in mind that the settings will vary based on the laser machine and laser power.
Tip:
Test the parameters on the back of the slate board.
Laser Parameters
Color
Process
Power (%)
Speed (%)
ppi/Hz
Engraving: black
Engrave CO2
60
100
500
Scratching: red
Cut CO2
20
2
1000
Passes
Air Assist
Z-Offset
Advanced
1
on
-
optimized quality
1
on
+6 mm
-
Step 3: Wooden frame
Make your own design or import our template. If necessary, adapt the graphic to the size of the slate sheets.
Send the job to the laser using the driver settings below.
Print settings:
Process mode
Resolution
Cut line
Standard
500 dpi
none
Halftone
Others
Color
Optimized geometries, inner geometries first
Tip:
Before cutting, measure the thickness of the wooden sheet and adapt the kerf if necessary. Also make sure that the slate sheet fits into the wooden frame.
Step 4: Laser process wooden frame
Determine and enter the material parameter settings. The parameters can vary depending on laser machine and available laser power.
Laser Parameters Cutting
Color
Process
Power (%)
Speed (%)
ppi/Hz
red
Cut CO2
95
0.3
1000
Passes
Air Assist
Z-Offset
Advanced
1
on
-
-
Info:
We used the standard parameters in JobControl for solid wood oak.
Step 5: Back
Make your own design or import our template.
Send the job to the laser using the driver settings below.
Print settings:
Process mode
Resolution
Cut line
Standard
500 dpi
none
Halftone
Others
Color
Optimized geometries, inner geometries first
Step 6: Laser process back
Determine and enter the material parameter settings. The parameters can vary depending on laser machine and available laser power.
Laser Parameters
Color
Process
Power (%)
Speed (%)
ppi/Hz
red
Cut CO2
90
2
1000
Passes
Air Assist
Z-Offset
Advanced
1
on
-
-
Info:
We used the standard parameters in JobControl for TroLase ADA Signage optimized for quality.
Step 7: Assembly
First, place the slate board inside the wood frame. Make sure the wooden frame accommodates the slate which will prevent distortion.
Second, glue the TroLase to the slate and wood.
Finally, position the signage mounts, and the weekly planner is finished.
Inspirations
Personalize the weekly planner for your customers. Use different dimensions, shapes and designs.
If you wish, you can use a cord to fix the planner on the wall instead of the signage mounting devices. In this case leave out the two holes on the bottom of the frame.
