See our lasers in action!
Laser engraver and cutter
Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
| Max. workpiece height: | 4.9 - 12.0 inch |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 49.0 x 28.0 up to 87.0 x 126.4 inch |
| Max. workpiece height: | 2.0 - 4.4 inch |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
| Max. workpiece height: | 9.8 - 30.1 inch |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser engraved padlocks - Love Locks
Step by step guide
You can see them on bridges all around the world. Typically the lovers' names or initials are engraved on the padlock, and the key is thrown away to symbolize their endless love.
Preparation
Required material:
- A padlock made from anodized aluminum
- A piece of wood or acrylic to build a tray for stability, or some plasticine
Used Trotec Laser:
- Speedy 100
- 60 watts
- 2.5 inch lens
Step by Step
Step 1: Build a tray
- To keep the padlocks stable during laser engraving process, you can:
- make a tray from wood or acrylics
- fix the lock with some plasticine (if you are only producing one of two custom pieces at time)
Step 2: Design and laser process
Open our template or create your own individual design and send it to the laser.
Parameters used:
Engraving: Power: 20% - Speed: 10% - Frequency: 1000ppi - Air Assist: ON - High Quality: ON