Fire Evacuation Sign

Use Trotec's TroLase Textures to engrave this fire evacuation sign.


Required material:

  • TroLase Textures 1/16" in Yellow/Black, half or quarter sheet

Machine used:

  • Speedy 400 120W with 2" lens and aluminum cutting grid table

For this sample you only can use any laser engraver and cutter from the Speedy series.


Graphic files

Step by Step

Step 1: Send job to laser

Create your own design or use our template. Now send the job to the laser with the settings below.

Print Settings

Process mode Standard
Resolution 500dpi
Cut line None
Halftone Ordered Dithering
Others Enhanced geometries, Inner geometries first



Step 2: Cut and engrave your sign

Create your own design or use our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Laser Parameters

  Engraving Cutting
Color Black Red
Process Engrave Cut
Power (%) 100 80
Speed (%) 40 2
ppi/HZ Auto PPI 1000
Passes 1 1
Air Assist ON ON
Z-Offset 0.16 -
Direction Top down -
Path Planning - Standard
Advanced Default Default



Step 3: Clean finished sign

Wipe down your finished sign with Hexanes or other suitable cleaner to remove any leftover residue.

Trotec Product Recommendation

See our lasers in action! Request a demo now
Request a demo now