Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step instructions
Personalize regular door mats with your Trotec laser for them to quickly and easily gain more value.
Any machine within the Speedy laser engraver series can be substituted, depending on the size of your door mat.
Because of the thick texture of the door mat, a lens with a long focal length is used to compensate for its unevenness.
Create a design of your own or use ours.
One finish, send the application to your laser machine using the following settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 333 dpi | none |
Halftone | Others |
---|---|
Color | - |
Because door mats are generally seen from a distance, a lower resolution can be used to cut down on production time.
Place the door mat in your Trotec laser and use the below parameter settings. Recommended settings may differ based on the laser machine used and the laser power available.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | Engrave CO2 | 80 | 100 | 500 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | ON | 4mm | - |
Because door mats are usually seen at a distance, a resolution of 333 dpi is enough.